Installation Guide for WPC Decking

Introduction

Wood Plastic Composite (WPC) decking is an innovative solution for outdoor flooring that combines the natural beauty of wood with the durability and low maintenance of plastic. Unlike traditional wooden decks that require regular treatment and are prone to rotting and warping, WPC decks offer a more sustainable and long-lasting option. This guide will walk you through the process of installing your own WPC deck, from gathering the necessary tools to achieving a professional finish.

Necessary Tools and Materials

To install a WPC deck, you will need the following tools and materials:

• WPC boards (Ensure they comply with local building codes)
• Decking screws
• Joist hangers
• Post anchors
• Concrete anchors
• Screw gun or drill
• Tape measure
• Level
• Chalk line
• Hammer
• Reciprocating saw or circular saw
• Gloves and safety glasses

Preparation Steps

Before you begin installation, it’s crucial to prepare the site properly. Start by marking out the area where the deck will be built using a chalk line. Ensure the ground is level and clear of any debris. If the surface is uneven, use a level to mark the high points and remove them until the entire area is level. Next, lay down landscape fabric to prevent weed growth under the deck. For elevated decks, construct a frame using pressure-treated lumber, ensuring all corners are square and the structure is level.

Installation Process

The actual installation of WPC decking can be broken down into several key steps:

Step 1: Installing the Frame

Begin by attaching the frame to the house if it’s a raised deck. Use joist hangers and concrete anchors to secure the frame to the concrete foundation. Make sure all connections are tight and secure.

Step 2: Laying the Decking Boards

Start laying the WPC boards perpendicular to the joists, leaving a small gap between each board for expansion. Use a screw gun to attach the boards to the joists using decking screws. Ensure the screws are countersunk slightly below the surface of the board to maintain a smooth appearance.

Step 3: Finishing Touches

Once all boards are in place, trim any excess material around the edges using a reciprocating saw. Install handrails and other safety features as required. Finally, apply a sealant or stain to protect the WPC boards from UV damage and moisture.

Tips for Achieving a Professional Finish

To ensure your WPC deck looks professionally installed, pay attention to details such as maintaining consistent gaps between boards, using appropriate hardware, and applying finishes evenly. Regular cleaning and occasional reapplication of sealants can help extend the life of your deck and keep it looking new.

Reference

WPC Decking Wikipedia Entry

Baoding Plastroy WPC Products

Why Choose Plastory?

Baoding Plastory New Materials Co., Ltd. is a manufacturer of decorative materials with over 9 years of experience and 56 separate production lines.

Currently, our annual production exceeds 30,000 tons, with products exported to more than 50 countries worldwide.

Plastory is the drafting unit of the WPC National Standards and has obtained certifications such as REACH, ASTM, CE, and FSC. Plastory is dedicated to maintaining consistent quality, focusing on details, and prioritizing customer satisfaction.

Our factory is located in Baoding, Hebei Province, China, with a prime location and convenient transportation access. Baoding is approximately a 1.5-hour drive from Beijing Capital International Airport and just 2 hours away from Tianjin Port, making it easy for global clients to visit and facilitating efficient shipping of goods. Our facility spans a large area, equipped with advanced production equipment and modern testing facilities to ensure that every batch of products meets the highest quality standards.

We warmly welcome clients from around the world to visit our factory, where you can see our production processes firsthand and experience our product quality. Please feel free to reach out to us—we are committed to providing you with the best products and services.

Kindly get in touch with us to request a product catalogue.